SUV · 2020–present
Land Rover Defender battery replacement in Dubai
The listed starting point for the Land Rover Defender (2020–present) is a AGM battery in the DIN H8 (L5)–H9 (L6) AGM family, around 90–105Ah, with the listed location under the bonnet. Engine, market and model year can change the specification; confirm fitment before installation. After a battery change on the new Defender the battery monitoring system has to be reset with a diagnostic tool, and mild-hybrid versions also carry a separate 48V battery that is not part of a standard swap.
Land Rover Defender battery
- Technology
- AGM
- Size family
- DIN H8 (L5)–H9 (L6) AGM
- Capacity
- 90–105Ah
- Location
- Under the bonnet
- Start-stop
- Yes
- Registration
- Check registration procedure
The technician confirms the size from the label or VIN.
When a Land Rover Defender needs a new battery
If two of these sound familiar, get it tested before it leaves you stuck.
- Slow cranking or repeated need for a jump start
- Start-stop is unavailable; check its other operating conditions before blaming the battery
- A battery or low-voltage-system warning on the display
- Discharge returns after charging; diagnose the system before replacing another battery
Choosing a Land Rover Defender battery by model year
This guide covers the Land Rover Defender across 2020–present. That range can span different generations, engines and markets. Supply the model year, engine and VIN or a clear battery-label photograph; the model badge alone is not enough to confirm fitment.
The listed case family is DIN H8 (L5)–H9 (L6) AGM with an indicative capacity of 90–105Ah. Check case length, width, height, terminal orientation and hold-down position against the vehicle specification. These are fitment starting points rather than approval for every variant.
Land Rover Defender battery technology and electrical compatibility
The listed Land Rover Defender application uses AGM. Where AGM is specified, keep AGM; a basic flooded battery is not an equivalent replacement. Confirm the required Ah capacity and CCA standard as well as the physical size. A change in capacity or technology may also change the battery-management procedure.
Access and installation on the Land Rover Defender
The listed battery location is under the bonnet. Confirm that position in the owner's manual for your variant before removing a cover. Check terminal orientation, the retaining bracket and clearance beneath the bonnet. Inspect terminal clamps, the ground connection and any negative-terminal sensor before disconnecting anything.
After fitting the correct part, it must be secured without cable strain or contact with sharp edges. Power-isolation steps, terminal sequence and tightening torque follow the vehicle procedure.
Checks after a Land Rover Defender battery replacement
For the Land Rover Defender, compare resting voltage, the correctly configured CCA test and charging readings with the vehicle specification. Voltage alone is not a complete battery-health test. If discharge recurs after charging or replacement, check connections, charging and electrical draw after the modules have entered sleep mode.
Check the VIN-specific battery registration or battery-management reset procedure. Where required, enter the battery technology and capacity, then review low-voltage faults and vehicle functions after fitting.
What to send for a confirmed Land Rover Defender battery match
Send the model year, engine, battery-label photograph and a view of the installation space. Include start-stop equipment. Confirm AGM or the manufacturer-specified alternative, fitment, availability and warranty terms before arranging installation.
Batteries we fit to the Land Rover Defender
All available in AGM and the correct size for this car.
Land Rover Defender battery change, step by step
No tow truck, no workshop queue. This is how every visit runs, whether it is 3pm or 3am.
- 01
Send your car and location
WhatsApp the make, model and year, or a photo of the battery label, plus a location pin. We confirm the right battery and the price before anyone drives out.
- 02
The nearest van heads to you
Technicians are spread across Dubai, so one is usually 20–35 minutes away. You get their name and live location while they drive.
- 03
Test before we sell
The battery, connections and the vehicle’s charging system are checked first. The procedure follows the installed battery type, including the low-voltage supply on hybrids and EVs. A battery is not replaced just because it is discharged.
- 04
Fitted, coded, under warranty
The matching battery is fitted using the vehicle-specific isolation and reconnection procedure, with registration or initialization where required. The old battery is collected for recycling. Up to 24 months warranty is stated on the receipt.
Land Rover Defender battery questions
Question not here? Send a message and a technician answers, not a bot.
What battery does a Land Rover Defender need?
The listed technology is AGM and the case family is DIN H8 (L5)–H9 (L6) AGM. Confirm model year, engine, manufacturer specification and the battery label before ordering; one model can have several factory fitments.
Where is the battery on a Land Rover Defender?
The location listed for this application is under the bonnet. Confirm access in the manual for your year and variant; remote jump points can be elsewhere.
Does the Defender need battery registration or a reset?
Battery registration or a battery-management reset is commonly required for this vehicle configuration. Confirm the VIN-specific procedure and correct technology/capacity before fitting.
We replace Land Rover Defender batteries in:
Land Rover Defender need a battery?
The nearest technician is usually 20–35 minutes away, day or night, across Dubai, Abu Dhabi and Sharjah.
- tabby
- tamara
- Card or cash